Laser Optics Test

 

SID4 SWIR

Key Features

HIGH RESOLUTION + HIGH SENSITIVITY |for visible and shortwave infrared


The SID4 SWIR wavefront sensor integrates Phasics patented technology with a high quality InGaAs detector. It ensures accurate wavefront analysis in SWIR source and lens testing.
 

  • Extended spectral range from 0.4 to 1.7µm – possible extension to higher wavelength (2.4µm) – the SID4 SWIR covers visible, NIR and SWIR regions without any calibration
  • Very high resolution – 160×128 phase pixels
  • High sensitivity – < 2nm phase noise through the whole spectral range – the SID4 SWIR is suitable to low energy IR sources
  • Compact and self-referenced for an easy set-up

 

Specifications

Wavelength range0.4 – 1.7 µm
(possible extension to 2.4 µm)
Aperture dimension9.60 x 7. 68 mm2
Spatial resolution60 µm
Phase & intensity sampling160 x 128
Resolution (Phase)< 2 nm RMS
Acquisition rateup to 120 Hz
Real-time processing frequency> 10 fps (full resolution)
Computer connectionGiga Ethernet
Dimensions (w x h x l)92 x 50 x 58 mm
Weight355 g

KALEO OEM Software

Introduction

LENS WAVEFRONT ANALYSIS | MTF + Aberrations


Kaleo software is dedicated to lens testing with Phasics wavefront sensors. It takes advantage of Phasics exclusive technique to provide a full set of optical quality parameters: MTF, PSF, aberrations… It assists the whole measurement process from alignment to advanced data analysis to help you getting the most out of wavefront measurement.

lens wavefront measurement software

Key Features

  • The most complete lens test: wavefront error, Zernike coefficient, MTF, PSF….
  • Reliable result calculation using expert algorithms
  • Flexible choices for measurement conditions and analysis: lens orientation, digital focus adjustment, pupil size, settings management…

 

Specifications

Wavefront analysisPhase map
Real time filtering of the wavefront information (Kernel, Zernike-based, Pupil size)
MTF + PSFOne shot full MTF cuve for all frequencies Digital focusing
Lens orientation selection
Acquisition managementSettings management
Camera management

R-Cube | add-on for double-pass test

Introduction

The R-CUBE is an add-on for easy double-pass measurement with Phasics wavefront sensors. It applies to mirror and large lens aberration measurement and helps calibrating optical test bench or the telescope in adaptive optics beamline. This illumination unit simply plugs to the wavefront sensor and delivers a very high quality collimated beam. So wavefront measurements in double pass are made easy and accurate.

Key Features

HIGH QUALITY ILLUMINATION
for accurate measurement


  • Ultra high quality collimated beam generation
  • High spatial resolution wavefront sensor: up to 300×400 phase pixels
  • Low noise

EASY SET-UP
Plug & Play device


  • Small footprint
  • Compatible with translation and tip/tilt stages for alignment
  • Separate add-on from the wavefront sensor that can be independently used

 

Specifications

Compatibility SID4, SID4-HR or SID4 SWIR
Beam diameterAdapted to related wavefront sensor pupil
Source wavelength635, 780, 808, 1064, 1550 or 1650 nm
Beam quality< 20 nm RMS (635-808 nm)
< 30 nm RMS (1064-1650nm)
Double-pass reference mirror qualityλ/20 PV (633nm)
Phase resolution (noise) < 2 nm RMS
Contact us to get those products