Adaptive Optics

SID4 V Vacuum


Phasics is innovating by proposing the first off-the-shelf vacuum compatible wavefront sensor on the market. The SID4 V is designed to perform wavefront measurements under high vacuum. the wavefront measurement is realized in-situ in the same condition as the experiment. Our new SID4 V vacuum wavefront sensor is also used to characterize laser beams after compression inside the compressor vessel. Finally, gas jet and plasma density are now measured as close to the target as possible.

BENEFITS: With Phasics’s unique strategy it’s now possible to correct the aberrations of every single optical element up to the target location inside the vacuum chamber.

Key Features


VACUUM COMPATIBLE & HIGH RESOLUTION | DESIGNED FOR VACUUM DOWN TO 10-6 mbar

  • Vacuum compatibility > 10-6 mbar
  • High resolution 160 x 120 phase pixels
  • Spectral range from 400 nm to 1100 nm
  • Diverging beam compatible
  • Invariant to thermal and mechanical vacuum constraints
  • Tolerates vacuum-cycles without any performance decrease
  • Both functional under vacuum and atmospheric pressure
  • Low outgassing

 

Specifications

Vacuum compatibility> 10-6 mbar
Wavelength range400 - 1100 nm
Aperture dimension4.73 x 3.55 mm2
maximum NA (optional software necessary)0.2
Spatial resolution29.6 µm
Phase & intensity sampling160 x 120
Accuracy15 nm RMS
Resolution (Phase)2 nm RMS
Acquisition rate60 fps
Real-time processing frequency7 Hz (full resolution)
InterfaceGiga Ethernet
MTBF> 10 years
Dimensions (w x h x l)54 x 46 x 75.3 mm
Weight~ 250 g

OAsys Software

Introduction

LOOP MANAGEMENT SOFTWARE | Advanced correction


OASys software module is designed for adaptive optics loop management. It controls both the wavefront sensor and the deformable optics. The NEW OASys software is compatible with any deformable mirror: square, circular or elliptical shape, mechanical or piezoelectric…

  • Complete laser and deformable mirror information
  • Advanced laser safety and mirror issues
  • Last parabola aberration automated removal

Adaptive-optics-mirror

Key Features

NEW FUNCTIONALITIES:

  • User-friendly interface & step-by-step loop control
  • Live statistics on beam quality and laser pointing
  • Embedded phase monitoring
  • Far field analysis

OASys Software for adaptive optics loop management

Specifications

Mirror management
  • Automated and manual mirror control
  • Automated calibration of mirror actuators
  • Phase map generation of any shape
Safety
  • Security tools (automates detection of laser issues)
Advanced process management
  • 3D pointing management
  • Process for full laser chain correction
Software developement kit
  • Easy integration in control command: C++/LabView/Matlab
  • Compatible with Tango interface

Deformable mirror

Introduction

ANY DEFORMABLE OPTICS | to fit your application


Phasics adaptive optics loop can integrate any deformable device: mechanical mirror, piezo-electric mirror, SLM, membrane… Thanks to many years of experience, Phasics provides its insightful support for deformable device choice and positioning. Its expert team will recommend the device that best fits the required performances , the budget imperatives and the environment constraints.

Key Features

ANY TECHNOLOGY


  • Mechanical mirror of the latest generation (stepper motors)
  • Piezo electric mirror either bimorph or monomorph
  • Membrane
  • SLM

ANY PROVIDER


  • Established partnerships with many providers: ISP, Night’N, Adaptica, Cilas, Alpao, OKO, Holoeye, Hamamatsu…
  • Insightful support based on many years of experience to fit your requirements
  • Possible made-to-order mirror

Specifications

ApplicationHigh Power LaserImaging correctionImaging correction
& beam shaping
TechnologyPiezo electric
(small diameter)
Piezo electric
(large diameter)
MechanicalMembraneSLM
Number of actuatorsup to 36up to 150up to 60up to 80600x800
or 1080x1920
Diameter15-25 mm30-400 mm22-500 mm10-30 mm7-16 mm
Damage thresholdVery highVery highVery highHighMedium
Loop speed5-10 Hz5-10 Hz1 Hz5-10 Hz5-10 Hz
Contact us to get those products