SID4 V Vacuum

back Back
SID4 V Vacuum

SID4 V Vacuum

Possible applications

SID4 V Vacuum


Phasics is innovating by proposing the first off-the-shelf vacuum compatible wavefront sensor on the market. The SID4 V is designed to perform wavefront measurements under high vacuum. the wavefront measurement is realized in-situ in the same condition as the experiment. Our new SID4 V vacuum wavefront sensor is also used to characterize laser beams after compression inside the compressor vessel. Finally, gas jet and plasma density are now measured as close to the target as possible.

BENEFITS: With Phasics’s unique strategy it’s now possible to correct the aberrations of every single optical element up to the target location inside the vacuum chamber.

Key Features


VACUUM COMPATIBLE & HIGH RESOLUTION | DESIGNED FOR VACUUM DOWN TO 10-6 mbar

  • Vacuum compatibility > 10-6 mbar
  • High resolution 160 x 120 phase pixels
  • Spectral range from 400 nm to 1100 nm
  • Diverging beam compatible
  • Invariant to thermal and mechanical vacuum constraints
  • Tolerates vacuum-cycles without any performance decrease
  • Both functional under vacuum and atmospheric pressure
  • Low outgassing

 

Specifications

Vacuum compatibility> 10-6 mbar
Wavelength range400 - 1100 nm
Aperture dimension4.73 x 3.55 mm2
maximum NA (optional software necessary)0.2
Spatial resolution29.6 µm
Phase & intensity sampling160 x 120
Accuracy15 nm RMS
Resolution (Phase)2 nm RMS
Acquisition rate60 fps
Real-time processing frequency7 Hz (full resolution)
InterfaceGiga Ethernet
MTBF> 10 years
Dimensions (w x h x l)54 x 46 x 75.3 mm
Weight~ 250 g